|Phase||Ingredients for ~100 gr||%||Quantity|
|A||Andiroba oil||10||10 gr|
|A||Cupuacu butter||20||20 gr|
|A||Emulsifing agent Olliva||5||5 gr|
|A||Stearic acid||2||2 gr|
|B||Pure/distilled water||56.8||56.8 gr|
|B||Sodium lactate||2||2 gr|
|C||Fresh Hay fragrance||0,8||0,8 gr|
|C||Copaiba essential oil||0,4||0,4 gr|
|C||Vitamin E||0,4||0,4 gr|
Sanitise the dedicated container and all utensils you work with, details in the best practice guide.
Heat phases A and B separately on a water bath in a heatproof glass to 70°C, then remove from heat. Pour phase B over phase A and mix for 1-2 minutes. Place the beaker in a bowl of cold water to accelerate cooling and continue mixing for a further 1-2 minutes. After cooling to about 40°C, add the ingredients of phase C in turn and mix thoroughly by hand.
After complete cooling, transfer to the dedicated container. pH: ~5.5
Body butter based on lipids from the Amazon rainforest, with emollient, nourishing, skin soothing and natural barrier strengthening benefits. Particularly pleasant to apply, with no greasy film, it leaves skin velvety soft and sublimely fragranced all day long.
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.