|Phase||Ingredients for~1 kg of soap||Quantity|
|A||Melt & Pour soap base White||1 kg|
|A||Flat/distilled water||50 ml|
|B||Green soap colour||2 drops|
|B||Blue soap colour||3 drops|
|B||Violet soap colour||1 drops|
|B||Lavender essential oil||20 ml|
|B||Eucalyptus Globulus essential oil||10 ml|
|B||Natural cosmetic fragrance oil Fresh Marine||10 ml|
Dilute the dyes with 30 drops of water, separately, each in a pouring cup.
The essential oil and fragrance oil are added over the dyes.
Place the soap base and the water in a heat-resistant dish, covered with foil and melt in a water bath or in the microwave.
The melted soap is divided into 3 approximately equal portions, quickly poured it into three cups.
The contents of the 3 cups are mixed briefly and energetically, then poured in the block soap mold, one after the other, from the corners of the mold.
At the end, a little alcohol is sprayed on the surface of the poured soap to release the air bubbles. Leave to harden on a flat surface.
After 24 hours, remove the soap from the mold and cut it into blocks, with the help of the wooden box for cutting soaps.
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.