Formula: CP106

For details regarding the terms used and the preparation, but also for your safety, please read the COLD SOAP MANUFACTURING GUIDE first.

A soap formulated with Tea tree essential oil, activated charcoal, Tamanu, Hemp and Black Cumin Seed oil, with purifying properties and beneficial for problematic skin. The addition of Lemongrass essential oil alleviates the heavier smell of some components and thus the soap smells pleasant, invigorating.

Note: 5% superfat

Ingredients for 300 gr of soap (3 blocks)

Tamanu oil

Black Cumin Seed oil

Hemp oil

Coconut oil RBD

Shea butter

Sodium hydroxide

Distilled water

Activated charcoal powder

Tea Tree essential oil

Lemongrass essential oil


19 gr

19 gr

19 gr

76 gr

57 gr

27 gr

72 gr

6 gr

4 gr

2 gr

Preparation method

Before you start preparing the soap, prepare all the utensils and equipment on the work table, to be at hand.
Weigh the necessary ingredients for the recipe.

In a heat-resistant glass, add the distilled water, over which, little by little, add the sodium hydroxide and mix slowly, carefully, until it dissolves completely and the solution becomes transparent. Leave the solution to cool to about 45°C.

In another heat-resistant container, heat the oils and butter in a water bath, to approximately 45°C, until the butter melts. Stir occasionally with a spatula. 
Add the charcoal powder to approximately 50 g of the heated oils and mix until dispersed.

Transfer the melted oils and butter to a container bigger that 300 ml, or you can use the vessel in which they were heated if it is large enough. Slowly pour the sodium hydroxide solution (lye) over the oils. Both must be of similar temperature.
Insert the blender into the bowl and mix until the consistency resembles that of a more liquid pudding, at which point the essential oils and activated charcoal dissolved in the oil are added to the composition. Mix quickly with the blender.

Pour the composition into the soap mold. Spray alcohol on the surface of the soap to prevent the formation of sodium carbonate.

Cover with foil and let it rest 2 days in a safe place. Once the soap has hardened, it can be removed from the mold. 

The soap is then cured in a well-ventilated area, on shelves or in covered boxes (but not tightly sealed, to allow air circulation). Curing lasts at least 4 weeks from the date of production, during which time the soap is not used because it is still reactive.

This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.

Posted on 11/06/2019 Soaps 0

Leave a CommentLeave a Reply

Cosmetic recipes search

Latest Comments