"Ice cube" refreshing summer soap

"Ice cube" refreshing summer soap

Formula: 74281 

Phase Ingredients for a 130 gr mold % Quantity
A melt & pour soap base, clear 98,8 126 gr
A blue soap color 1 drop
A green soap color  1 drop
A peppermint essential oil 0,83 1 gr (30 drops)
A ravintsara essential oil 0,17 8 drops
A eucalyptus globulus essential oil 0,25 12 drops

Clean the worktop, mold and all utensils you work with, details in the general safety guidelines.

Preparation method:
Place the diced soap base (as small as possible, about 1 cm) in a heat-resistant container (Berzelius beaker or stainless steel cup) and melt in a water bath.

In a small container, dilute the blue and green dye in 10 drops of water. After the soap has completely melted, add the diluted dyes and essential oils, then remove the composition from the water bath. 

The soap is quickly poured into the prepared mold. Leave the soap mold on a flat surface. After 30 minutes of cooling, sprinkle with sugar crystals and lightly press the sugar into the soap. After approximately 4 hours the soap is removed from the mold and left to dry until the next day, in an environment as dry as possible. After 24 hours, the soap can be used.

Important:
If the environment in which the soap is stored has medium or high humidity, "dew" may appear on its surface and a gelatinous layer may form. This is a natural phenomenon that occurs in all melt & pour type natural soaps.
To avoid this phenomenon, it is advisable to wrap the soap in a foil or store it in a hermetically sealed container.
When preparing a recipe, after removing the soap from the form/mold, it is stored in a dry place, but if it will not be used in soon, it will be wrapped in plastic foil.

An invigorating, energizing, refreshing soap, specially created for hot summer days. Due to the essences used, it has a unisex scent and gives long-lasting freshness. 

...

  • Difficulty: beginner/advanced/experienced
  • Utensils: precision scale, cup or heat-resistant glass, tablespoon/spatula
  • Recommended mold: soap mold, Square

This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.

Posted on 06/19/2019 Soaps 0

Leave a CommentLeave a Reply

Menu

Settings