|Phase||Ingredients for ~50 ml||Quantity|
|A||emulsifying olive wax||8,5 gr|
|B||rice powder||2,5 gr|
|B||vege-silicone, volatile||5 gr|
Sanitize the dedicated containers and utensils you will work with, details in the general safety guidelines.
Add phase A to a heat-resistant beaker and heat until the emulsifier has completely melted.
Remove from the heat and incorporate the ingredients from phase B, with thorough mixing. Add the powders by sprinkling them, to avoid the formation of lumps.
After the composition has cooled completely, mix again thoroughly and transfer to the dedicated container.
The consistency and the texture will be finalized after 24 hours.
The result is a primer formulated to be generally suitable for all skin types. It is colorless and leaves a fine satin layer that evens out the skin. Apply a small amount by gentle smoothing movements. A few minutes after application, foundation and other makeup products can be applied.
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.