|Phase||Ingredients||%||Quantity for a 80 gr mold|
|A||castor oil||10||7 gr|
|A||stearic acid||10||7 gr|
|A||sodium cocoyl isethionate||54,7||38 gr|
|A||cocamidopropyl betaine, powder||10||7 gr|
|A||flat water||10||7 gr|
|B||aromatic apricot extract||3||2 gr|
|B||natural cosmetic fragrance oil Cherry Blossoms||2||1,4 gr|
|B||vitamin E||0,3||7 drops|
Sanitize the dedicated containers and utensils you will work with, details in the general safety guidelines.
Add the castor oil and the stearic acid to a heat-resistant glass (Berzelius beaker) and place it in a water bath until the composition melts. Add the rest of the ingredients from phase A and continue heating, stirring slowly, thoroughly, until a fluffy paste is formed, as homogeneous as possible.
Remove from the water bath and add the ingredients from phase B, one at a time, mixing after each. At the end mix the composition thoroughly for a short time.
The composition thus prepared is transferred as quickly as possible to the prepared mold, before solidification begins. Press well, with the back of the teaspoon or manually (with gloves).
Leave to cool and harden, on a flat surface, for at least 4 hours, after which the block is removed from the mold. It is placed on a napkin or a small grill, and after 48 hours it can be used.
The result is a gentle but effective hygiene product, without soap, it forms a creamy and rich foam that gently cleanses the skin, leaving it smooth and velvety.
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.