|Phase||Ingredients for one application||Quantity|
|A||rose water||5 gr|
|A||flat water||7,5 gr|
|B||beige clay||2 gr|
|C||argan oil||1 gr|
|C||cistus essential oil||1 drops|
Sanitize the dedicated containers and utensils you will work with, details in the general safety guidelines.
In a bowl, mix the waters from phase A.
In another bowl mix the clays from phase B.
Sprinkle phase B over phase A and allow the clays to absorb the liquid without mixing. This procedure is recommended to avoid the formation of lumps and to obtain a homogeneous texture.
Mix the composition, add the oils from phase C and mix again until a soft, even paste is obtained.
Note: depending on the batch, the density of the clays may vary slightly, and if at the end of the preparation the mask is too fluid or too compact, it will be supplemented with a little clay or water, as appropriate.
The mask is ready and should be used immediately after preparation. Apply on clean skin with a brush, avoiding the eye area and lips. It is left to act approximately 10 minutes. If the skin is sensitive, leave it for a shorter time, approximately 5 minutes.
Take advantage of this time to relax in a comfortable position.
With a sponge soaked in lukewarm water, moisten the mask on the skin to make rinsing easier. Rinse with plenty of water, dab your skin with a soft towel, then apply a toner and moisturizer.
The Moroccan mask is suitable for any skin type, especially for congested, mixed/oily skin and in case of acne/post-acne. It can be applied 2-3 times a week in a specific treatment or once a week for general skin care.
Options and explanations:
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.