|Phase||Ingredients for ~ 30 ml||Quantity|
|A||soy wax||27 gr|
|A||green 17 oxide, cosmetic pigment||0,07 gr (1 + ½ x DROP spoon)|
|A||yellow 09 oxide, cosmetic pigment||0,05 gr (1 + ½ x DROP spoon)|
|B||may chang essential oil||2,1 gr|
|B||vetiver essential oil||0,6 gr|
Sanitize the dedicated containers and utensils you will work with, details in the general safety guidelines.
Prepare the container for the candle, the corresponding wick and a piece of aluminum foil cut into a square shape, with a width slightly larger than the size of the wick. A piece of suitable length is cut from the wick: the inner height of the container + approximately 1 cm. Prepare the exact amount of pigment in a small bowl or cap and in another small bowl/glass the mixture of phase B ingredients.
If you do not work with pre waxed wick, follow the instructions below.
Add the wax to a heat-resistant glass and melt in a water bath, stirring slowly. Put the wick in the melted wax for about 1 minute, then remove it (with tweezers or scissors) and place it on the piece of aluminum foil, in the middle, horizontally, as straight as possible. Fold the foil in half, cover the wick and place in the freezer for a few minutes. The waxed wick is inserted into the metal staple from the base and passed through the hole on the other side.
Melting and coloring:
Add the pigments to the melted wax and mix until the color is completely dispersed. Move away from heat source. Take a portion of the melted wax with a teaspoon and place it at the base of the container, over which, quickly, place the stapled part of the wick. The staple wick must remain stable in the container before pouring the candle.
In the melted wax - which preferably has a temperature between 60-68°C - add the ingredients of phase B and mix well, quickly.
The composition is poured into the dedicated container and left on a flat surface until solidified.
Tip: to prevent the wick from moving from the middle of the container, you can use a straw cut lengthwise (see third picture)
The candle thus prepared can be used 48 hours after preparation. You can find images that can help you to more easily understand the process of preparing the recipe (fourth picture above).
Options and explanations:
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.