|Phase||Ingredients for a 80 gr mold||%||Quantity|
|A||Sodium coco-sulfate||72||57,6 gr|
|A||flat mineral water||10||8 gr|
|A||castor oil||4||3,2 gr|
|B||maca extract||2||1,6 gr|
|B||ylang-ylang essential oil||2||53 drops|
Sanitize the mold and utensils you will work with, details in the general safety guidelines.
Add the Sodium coco-sulfate and the flat water to a heat-resistant glass. Place the glass in a water bath and heat the composition for about 10 minutes, stirring in the meantime. The Sodium coco-sulfate will not melt completely, some of the granules remain visible. Add the vegetable oil and silicone, and mix well.
Remove the beaker from the water bath and add the phase B ingredients one at a time. Mix the composition vigorously so that the paste is as homogeneous as possible. Transfer the paste to the soap mold and press it well. At the end you can press the surface with gloves or a paper towel.
Leave to dry and harden for at least 4 hours, after which it can be removed from the mold. The shampoo thus prepared needs approximately 48 hours for drying, after which it can be used.
The result is a solid shampoo enriched with castor oil and maca extract for nourishment, fortification and a healthy scalp. The honeyquat and coco-silicone are moisturizing and conditioning agents.
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.