|Phase||Ingredients for ~45 ml||%||Quantity|
|A||vanilla oil||43||21,5 gr|
|A||zinc ricinoleate||3||1,5 gr|
|B||rice powder||12||6 gr|
|B||alum powder||5||2,5 gr|
|B||stearic acid||30||15 gr|
|C||Triethyl citrate||5||2,5 gr|
|C||palmarosa essential oil||0,5||8 drops|
|C||natural cosmetic fragrance oil Lily of the valley||1,5||24 drops|
Sanitize the dedicated containers and utensils you will work with, details in the general safety guidelines.
Prepare the container first: after sanitizing and drying, grease the intermediary cap with a little vanilla oil and attach it to the body of the container. Then add the lid but do not close it as tightly as possible, to facilitate the opening.
The ingredients of phase A are added to a heat-resistant glass and melted in a water bath.
Mix the phase B ingredients and add this mixture over the phase A composition. Leave it in the water bath until it liquefies and the composition becomes uniform, stirring continuously.
Remove the beaker from the water bath, add the phase C ingredients one at a time and mix very well.
When the composition begins to thicken slightly, pour into the container.
Pouring into the container:
The prepared container is positioned upside down, and the still fluid composition is poured through the hole in the base. Leave the container in this position for at least 4 hours, preferably until the next day.
Fix the corresponding small cap over the wheel at the base. Before removing the lid for the first time, place the deodorant in the freezer for a few minutes.
Remove from the freezer, carefully remove the lid and then remove the intermediary lid - which should not be used until the next pour into the container.
Tip: if the top of the deodorant stick breaks when the cap is removed, it can be attached back with a slight pressure and can eventually be pressed together with your fingers (with gloves).
The result is a deodorant with 4 natural deodorizing and antibacterial active ingredients: zinc ricinoleate, Triethyl citrate, alum powder and palmarosa essential oil. It is pleasant to apply, leaves no unaesthetic white marks, has a pleasant floral scent.
Options and explanations:
This formula was developed by Elemental's qualified staff. The recipes are intended to exemplify the use of products marketed by Elemental and are believed to be accurate, however, Elemental assumes no liability or risk associated with the use of its products for the preparation and evaluation of the recipe as the conditions of preparation and use are beyond its control. The Elemental customer must ensure that the reproduction of the formulation does not infringe any intellectual property rights and that it complies with the specific rules and regulations in force. The person who prepares the recipe must refer to the safety data sheets to ensure the safe handling of all raw materials and bears full responsibility for ensuring the safe and correct use and storage of all materials procured and used. Assessments of the safety, stability, regulatory compliance and suitability of this recipe, methods and the finished product are the sole responsibility of the user and/or the legal entity placing the product on the market. Elemental is not liable for any damages resulting from the use of this information, and assumes no responsibility for misuse of selected materials, formula or method, in whole or in part.