Formula: 34108
Phase | Ingredients for~1 kg of soap | Quantity |
A | Melt & Pour soap base White | 1 kg |
A | Flat/distilled water | 50 ml |
B | Green soap colour | 2 drops |
B | Blue soap colour | 3 drops |
B | Violet soap colour | 1 drops |
B | Lavender essential oil | 20 ml |
B | Eucalyptus Globulus essential oil | 10 ml |
B | Natural cosmetic fragrance oil Fresh Marine | 10 ml |
Preparation method:
Dilute the dyes with 30 drops of water, separately, each in a pouring cup.
The essential oil and fragrance oil are added over the dyes.
Place the soap base and the water in a heat-resistant dish, covered with foil and melt in a water bath or in the microwave.
The melted soap is divided into 3 approximately equal portions, quickly poured it into three cups.
The contents of the 3 cups are mixed briefly and energetically, then poured in the block soap mold, one after the other, from the corners of the mold.
At the end, a little alcohol is sprayed on the surface of the poured soap to release the air bubbles. Leave to harden on a flat surface.
After 24 hours, remove the soap from the mold and cut it into blocks, with the help of the wooden box for cutting soaps.
...
|